How difficult is it to construct your soccer field? What tools are required to create a unified soccer field? What supplies will you need? How much to build a soccer field? We’ll address all of those questions and more in this post. Continue reading to find out how to construct a soccer pitch by following the procedures outlined below.
Process to Make a Soccer Field
Step 1: Begin by finding and measuring one of the end lines. Drive a spike at either end of the line once you’ve located the two lots by drawing the tape measure tight to 180′. On one end of the field, these spikes symbolize the corners. Also, at 90′, insert a point in the center of the line.
Step 2: Run a tightened string between the corner spikes with the tape measure. It is where the math fun begins. Begin measuring from each corner spike and one from the center spike with a tape measure. We’ll use the Pythagorean Theorem (a2+b2=c2) to create a right triangle, with one side being the segment (a) from the center spike to the corner and the other being the segment (b) from the corner to where the sideline meets the field centerline.
Step 3: This is roughly half the end line length and half the sideline length, depending on the field dimensions you’re trying to put up. Our field is 60 yards by 120 yards (180′ x 360′). Thus the triangle sides are 90′ and 180′ in our example, and the hypotenuse is calculated as c=(902+1802)=201.25.
Step 4: Running the tape from the corner out 180′ and the video from the central spike out 201′ 3″ will indicate this position. Place a point where the two tapes meet after they’ve been pulled tight. To measure the middle of the other sideline, start from the opposite corner.
Step 5: Between the two spikes you set in step 3, run a tape measure and a string. It is where you’ll draw your centerline. Add a new end to the line’s center point as well.
Step 6: Measure out in the same direction and manner as in step 3 from the three spikes in your centerline. It will make it easier for you to locate and spike the opposite-end corner locations.
Step 7: Measure the distance between the two corner spikes you set in step 5 with a tape measure. It is the opposite end of your line. Put a point in the middle of this line as well.
Step 8: Your perimeter spikes are now in place. To finish the perimeter, continue the thread used to mark the first end line along the sideline, down the opposite end line, and back down the other sideline.
Step 9: We must now take measurements for the goal boxes. Measure out each direction along the line half the width of the goals used on this field from the center spike on one end line, then drive spikes at these points.
How much to build a soccer field? You may now put your goals together and set them in the nets, matching the posts with the painted hash markings you made earlier. To fulfill safety regulations, make sure the objective is anchored.