Scriptonite Daily

An epoxy garage floor is a great way to protect and enhance your garage. It can be a cost-effective project that you can do yourself with the right materials and a bit of patience. Here is a look at how to install an epoxy garage floor.

First, you will need to prepare the surface. This means thoroughly cleaning the floor and removing any dust, dirt, and debris. To get more details about epoxy garage floor installation you may Read More Here.

Image Source: Google

You will also want to use a degreaser to remove any oil or grease stains that may be present. Once the surface is cleaned and dry, it is time to apply the epoxy. Epoxy is typically applied in two coats. 

The first coat is a primer coat that will help the epoxy adhere to the floor and create a bond. You will need to use a push broom to spread the primer around in a thin and even layer. Allow this to dry completely before adding the second coat.

The second coat will be the actual epoxy. This is the coat that will give your garage floor the desired color and finish. This will be a thicker coat than the primer and should be applied with a roller. Once the epoxy is applied, you will want to add a non-skid additive to the epoxy to make it less slippery.

Once the epoxy has dried, it is time to apply the topcoat. This is a protective layer that will help protect the epoxy from wear and tear. You can use a brush or roller to apply the topcoat. Allow this to dry and you are done.